See PDF on "How to use AutoPunch Wizard in CE-100 & CE-200". 

See this PDF for instruction on "How to use AutoPunch™ Wizard"

AutoPunch™ is not suitable for the creation of lettering.  It is unable to read the data in order to process it correctly.  Even if you created the letters in graphics software and brought them into the SINGER Futura™ program, the AutoPunch™ is unable create a satisfactory result.  

There is an optional program called HyperFont™ that will automatically digitize any built-in TrueType fonts from your computer.  This program is available through your local SINGER Retailer.

You cannot import more than one design into the hoop unless it is from the Built-in Library designs. It is possible to add a Library design or Lettering to a pre-digitized design during layout. 

1. Place the CD in the tray.  It should auto run.  If you’ve already had it in your computer you will have the Quick Time viewer installed.  Quick Time is a free program included on this CD.

1. Place the Stock Design CD in the tray.  You will see a Start Up Screen. Please close this screen. 

SINGER® FUTURA™ machines report the hoop attached to the computer only one time, when the SINGER® Futura™ program is started. If there is no hoop attached the program will assume that the large hoop is mounted. So, if a user decides to use a different hoop than the one the machine has detected, it is necessary to change the program's setting before embroidering (see below procedure, Step 4). However, there is a correct procedure/sequence to set up the SINGER® Futura™ machines for embroidery.

Use the "DESIGN BROWSER" located under FILE on the horizontal tool bar.

Not only can you view the design, but also when you select it you can see the color blocks, size and stitch count.